Skip to content

Darkglass Electronics · Amp Modeller

Element

9V · 250 mA · maker

Darkglass Electronics Element power requirements

  • 9V DC · centre negative · draws 250mA

    the voltage it ships for · digital · from the maker

    “Use a 9-12V DC power supply (Center negative 2.1/5.5 mm barrel plug). Current consumption 250mA.” source

    Checked 2026-10-14

  • 12V DC · centre negative · current not published

    digital · from the maker

    “Voltage : 9-12 V DC (Center Negative) … Power : Use a 9-12V DC power supply (center negative 2.1/5.5 mm barrel plug)” source

    Checked 2026-10-14

Size

64 × 111 × 35 mm (2.52 × 4.37 × 1.38 in)

Width × depth × height, from the manufacturer.

Power supplies that can run it

Each has an output that can power it, checked against its published figure. Plan the whole board to see what runs everything.

  • Walrus Audio Canvas Power 1515 outputs · isolatedSweetwater
  • Voodoo Lab Pedal Power 3 Plus12 outputs · isolatedSweetwater
  • Strymon Zuma9 outputs · isolatedSweetwater
  • Voodoo Lab Pedal Power 38 outputs · isolatedSweetwater
  • Truetone 1 SPOT Pro CS1212 outputs · isolatedSweetwater
  • Truetone 1 SPOT Pro CS77 outputs · isolatedSweetwater

Plan a board with it

Affiliate disclosure: some links to retailers are affiliate links. If you buy through one we may earn a commission, at no extra cost to you. It never changes what we show you.

Pedalatry is independent and not affiliated with, or endorsed by, any manufacturer or retailer. Product names are trademarks of their owners, used only to identify their products.

© 2026 PedalatryPrivacyTermsContact