Skip to content

DigiTech · Overdrive · discontinued

Screamin' Blues

9V · 23 mA · maker

Screamin' Blues, 79.38 by 125.41 mm
Buy at SweetwaterFind it used on Reverb

DigiTech Screamin' Blues power requirements

  • 9V DC · centre negative · draws 23mA

    the voltage it ships for · also runs on a 9V battery · from the maker

    “Power Supply - 9V Alkaline Dry Battery • Current Draw ~ 23mA (at 9VDC) • Power Consumption - 4.8Watts (w/optional PS200R power supply)” source

    Checked 2026-10-14

  • 9.6V DC · centre negative · current not published

    from the maker

    “PS200R Products … Screamin Blues Overdrive … Barrel Jack: 9.5mm length, 5.5mm width, 2.1mm pin, Center Negative Input: 120V (AC) 60 Hz 80W Output: 9.6V (DC) 300mA” source

    Checked 2026-10-14

Size

79.38 × 125.41 × 53.98 mm (3.13 × 4.94 × 2.13 in)

Width × depth × height, from the retailer listing.

Power supplies that can run it

Each has an output that can power it, checked against its published figure. Plan the whole board to see what runs everything.

  • Walrus Audio Canvas Power 1515 outputs · isolatedSweetwater
  • Voodoo Lab Pedal Power 3 Plus12 outputs · isolatedSweetwater
  • Truetone 1 SPOT Pro CS1212 outputs · isolatedSweetwater
  • MXR M238 ISO-Brick10 outputs · isolatedSweetwater
  • Strymon Zuma9 outputs · isolatedSweetwater
  • Voodoo Lab Pedal Power 38 outputs · isolatedSweetwater

Plan a board with it

Affiliate disclosure: some links to retailers are affiliate links. If you buy through one we may earn a commission, at no extra cost to you. It never changes what we show you.

Pedalatry is independent and not affiliated with, or endorsed by, any manufacturer or retailer. Product names are trademarks of their owners, used only to identify their products.

© 2026 PedalatryPrivacyTermsContact