Skip to content

DigiTech · Pitch / Octave

Whammy Ricochet

9V · 235 mA · maker

Whammy Ricochet, 73 by 121 mm
Buy at SweetwaterFind it used on Reverb

DigiTech Whammy Ricochet power requirements

  • 9V DC · centre negative · draws 235mA · needs a supply of at least 300mA

    digital · from the maker

    “Power Consumption: 2.1 Watts (235 mA typical @ 9 VDC) Power Requirements: 9 VDC External Adapter (sold separately) … When powering the Ricochet with a multi-pedal power adapter, ensure the power connection provides a minimum of 300mA of current.” source

    Checked 2026-10-14

Size

73 × 121 × 45 mm (2.87 × 4.76 × 1.77 in)

Width × depth × height, from the retailer listing.

Power supplies that can run it

Each has an output that can power it, checked against its published figure. Plan the whole board to see what runs everything.

  • Walrus Audio Canvas Power 1515 outputs · isolatedSweetwater
  • Voodoo Lab Pedal Power 3 Plus12 outputs · isolatedSweetwater
  • Truetone 1 SPOT Pro CS1212 outputs · isolatedSweetwater
  • MXR M238 ISO-Brick10 outputs · isolatedSweetwater
  • Strymon Zuma9 outputs · isolatedSweetwater
  • Voodoo Lab Pedal Power 38 outputs · isolatedSweetwater

Plan a board with it

Affiliate disclosure: some links to retailers are affiliate links. If you buy through one we may earn a commission, at no extra cost to you. It never changes what we show you.

Pedalatry is independent and not affiliated with, or endorsed by, any manufacturer or retailer. Product names are trademarks of their owners, used only to identify their products.

© 2026 PedalatryPrivacyTermsContact