Skip to content

EarthQuaker Devices · Overdrive · discontinued

Talons

9V · 5 mA · maker

EarthQuaker Devices Talons power requirements

  • 9V DC · centre negative · draws 5mA

    the voltage it ships for · also runs on a 9V battery · from the maker

    “A standard 9-18 volt DC power supply intended for musical instruments with a negative center 2.1mm barrel. … Will also run off a 9v battery for you olde tymee types. Current draw is 5 mA.” source

    Checked 2026-10-14

  • 18V DC · centre negative · current not published

    from the maker

    “A standard 9-18 volt DC power supply intended for musical instruments with a negative center 2.1mm barrel. 18v will yield higher headroom with a slightly brighter, stronger tone and more volume.” source

    Checked 2026-10-14

Size

63.5 × 120.65 × 57.15 mm (2.50 × 4.75 × 2.25 in)

Width × depth × height, from the manufacturer.

Power supplies that can run it

Each has an output that can power it, checked against its published figure. Plan the whole board to see what runs everything.

  • Walrus Audio Canvas Power 1515 outputs · isolatedSweetwater
  • Voodoo Lab Pedal Power 3 Plus12 outputs · isolatedSweetwater
  • Truetone 1 SPOT Pro CS1212 outputs · isolatedSweetwater
  • MXR M238 ISO-Brick10 outputs · isolatedSweetwater
  • Strymon Zuma9 outputs · isolatedSweetwater
  • Voodoo Lab Pedal Power 38 outputs · isolatedSweetwater

Plan a board with it

Affiliate disclosure: some links to retailers are affiliate links. If you buy through one we may earn a commission, at no extra cost to you. It never changes what we show you.

Pedalatry is independent and not affiliated with, or endorsed by, any manufacturer or retailer. Product names are trademarks of their owners, used only to identify their products.

© 2026 PedalatryPrivacyTermsContact