Electro-Harmonix · Looper

45000 Multi-Track Looper

9.6V · 190 mA · maker

Electro-Harmonix 45000 Multi-Track Looper power requirements

9.6V DC · centre negative · draws 190mA · needs a supply of at least 200mA
the voltage it ships for · digital · from the maker
“Power Supply 9.6VDC-200mA power adapter included … Current Draw 190mA” source
Checked 2026-10-13
9V DC · centre negative · draws 190mA · needs a supply of at least 200mA
digital · from the maker
“9VDC/200mA Power Jack … Connect the output plug of the supplied AC Adaptor into the 9VDC power jack on the rear panel of the 45000. The 45000’s current requirement is 190mA at 9VDC. The polarity of the power jack is center negative.” source
Checked 2026-10-13

241.3 × 165.1 × 69.85 mm (9.50 × 6.50 × 2.75 in)

Width × depth × height, from the manufacturer.

Each has an output that can power it, checked against its published figure. Plan the whole board to see what runs everything.