Electro-Harmonix · Looper · discontinued

95000 Performance Loop Laboratory

9.6V · 400 mA · maker

Electro-Harmonix 95000 Performance Loop Laboratory power requirements

9.6V DC · centre negative · draws 400mA · needs a supply of at least 500mA
the voltage it ships for · digital · from the maker
“Current Draw: 400mA at 9V. Maximum allowable power supply voltage: 10.5 VDC … 9.6VDC 0.5A power supply” source
Checked 2026-10-13
9V DC · centre negative · draws 400mA
digital · from the maker
“9VDC 400mA Power Jack Connect the output plug of the factory-supplied AC Adapter into this 9VDC power jack. The current requirement is 400mA at 9VDC. The polarity of the power jack is center negative.” source
Checked 2026-10-13

323.85 × 152.4 × 69.85 mm (12.75 × 6.00 × 2.75 in)

Width × depth × height, from the manufacturer.

Each has an output that can power it, checked against its published figure. Plan the whole board to see what runs everything.