Electro-Harmonix · Wah

Cock Fight

9.6V · 40 mA · maker

Electro-Harmonix Cock Fight power requirements

9.6V DC · centre negative · draws 40mA · needs a supply of at least 200mA
the voltage it ships for · from the maker
“Power Supply 9.6VDC-200mA power adapter included … Current Draw 40mA” source
Checked 2026-10-13
9V DC · centre negative · draws 40mA
also runs on a 9V battery · from the maker
“The Cock Fight requires 40mA at 9VDC with a center negative plug. … To change your 9-volt battery, you must remove the 4 screws on the bottom of the Cock Fight.” source
Checked 2026-10-13

101.6 × 120.65 × 57.15 mm (4.00 × 4.75 × 2.25 in)

Width × depth × height, from the manufacturer.

Each has an output that can power it, checked against its published figure. Plan the whole board to see what runs everything.