Electro-Harmonix · Utility

Micro Synth

9.6V · 55 mA · maker

Electro-Harmonix Micro Synth power requirements

9.6V DC · centre negative · draws 55mA · needs a supply of at least 200mA
the voltage it ships for · from the maker
“Power Supply 9.6VDC-200mA power adapter included … Current Draw 55mA” source
Checked 2026-10-13
9V DC · centre negative · draws 55mA
from the maker
“Connect the output plug of the supplied AC Adaptor into the 9V power jack at the top of the Micro Synth. The Micro Synth’s maximum current requirement is 55mA at 9VDC. The polarity of the power jack is center negative. The maximum allowable power supply voltage is 12VDC.” source
Checked 2026-10-13

146.05 × 120.65 × 63.5 mm (5.75 × 4.75 × 2.50 in)

Width × depth × height, from the manufacturer.

Each has an output that can power it, checked against its published figure. Plan the whole board to see what runs everything.