TC Electronic · Looper

Ditto Looper

9V · ≥100 mA supply · maker

TC Electronic Ditto Looper power requirements

9V DC · centre negative · needs a supply of at least 100mA
digital · from the maker
“1 – Power input This is a standard 5.5/2.1 mm DC plug (centre = negative). To power up Ditto Looper, connect a power supply to its power input socket. Ditto Looper requires a 9 V power supply providing 100 mA or more (not supplied).” source
Checked 2026-10-13

48 × 93 × 48 mm (1.89 × 3.66 × 1.89 in)

Width × depth × height, from the manufacturer.

Each has an output that can power it, checked against its published figure. Plan the whole board to see what runs everything.