TC Electronic · Looper

Ditto X2 Looper

9V · ≥100 mA supply · maker

TC Electronic Ditto X2 Looper power requirements

9V DC · centre negative · needs a supply of at least 100mA
digital · also runs on a 9V battery · from the maker
“(1) Power input - The power input of this pedal is a standard 5.5 / 2.1 mm DC plug (centre = negative). To power up your pedal, connect a power supply to its power input socket. Ditto X2 Looper requires a 9 V power supply providing 100 mA or more (not supplied).” source
Checked 2026-10-13

113 × 135 × 54 mm (4.45 × 5.31 × 2.13 in)

Width × depth × height, from the manufacturer.

Each has an output that can power it, checked against its published figure. Plan the whole board to see what runs everything.