Skip to content

ZVEX Effects · Fuzz

Fuzz Factory 7

9V · 50 mA · maker

Fuzz Factory 7, 92.46 by 121.92 mm
Buy at SweetwaterFind it used on Reverb

ZVEX Effects Fuzz Factory 7 power requirements

  • 9V DC · centre negative · draws 50mA

    also runs on a 9V battery · from the maker

    “‘On’ current is generally less than 10 mA but may be as high as 50mA on some settings. … All ZVEX pedals use a 9V DC power supply with (–) polarity on the middle pin (typical Boss™ power supply). Using the incorrect supply may damage your pedal. Obviously, you can power your pedal with a good old 9V battery, too.” source

    Checked 2026-10-14

Size

92.46 × 121.92 × 53.34 mm (3.64 × 4.80 × 2.10 in)

Width × depth × height, from the manufacturer.

Power supplies that can run it

Each has an output that can power it, checked against its published figure. Plan the whole board to see what runs everything.

  • Walrus Audio Canvas Power 1515 outputs · isolatedSweetwater
  • Voodoo Lab Pedal Power 3 Plus12 outputs · isolatedSweetwater
  • Truetone 1 SPOT Pro CS1212 outputs · isolatedSweetwater
  • MXR M238 ISO-Brick10 outputs · isolatedSweetwater
  • Strymon Zuma9 outputs · isolatedSweetwater
  • Voodoo Lab Pedal Power 38 outputs · isolatedSweetwater

Plan a board with it

Affiliate disclosure: some links to retailers are affiliate links. If you buy through one we may earn a commission, at no extra cost to you. It never changes what we show you.

Pedalatry is independent and not affiliated with, or endorsed by, any manufacturer or retailer. Product names are trademarks of their owners, used only to identify their products.

© 2026 PedalatryPrivacyTermsContact